Filled with Features and Functions, the Kenwood TS 2000 Keeps You Connected
The Kenwood TS 2000 HF/VHF/UHF is a transceiver radio that is packed with features and functions to keep you connected wherever you go. With the ability to receive a transmission of the highest and lowest frequencies, you are able to stay informed of weather, news, and other audio needs you may experience. You will find a wide range of reasonably priced Kenwood TS 2000 radios available on eBay.
Is the Kenwood TS 2000 discontinued?- User manual (2.9 MB) Service manual (7.5 MB) Service supplement (18 MB) 2SK2596 HF/VHF pre pre-driver 2SC1971 HF/VHF pre-driver 2.2SC1972 drivers 2.2SC5125 HF power transistors 2.2SC2694 144 MHz power transistors Modifications: Sensitivity on MW (1 KB) Reviews: Options/Accessories.
- Read and download Kenwood Transceiver TS-2000 Instruction Manual online. Download free Kenwood user manuals, owners manuals, instructions, warranties and installation guides, etc.
- Compact TS-2000 and TS-2000X Mini-manual. Size, 4.5x8 inches. This very capable radio has it all, and this Mini-manual in eighteen high-quality laminated pages covers all of it. Eighteen high-quality laminated pages loaded with detailed instructions covering the extensive range of features of this all-mode multi-band transceiver.
Yes, the manufacturer is no longer building the Kenwood TS 2000 model transceiver radio. However, you can still find plenty of different options available on eBay. Checking the condition of the product will give you an idea of whether the product is in playable condition or can be used for parts and replacement for a current TS 2000 model you currently own.
The TS-2000/2000X/B2000 is serious about digital signal processing. Kenwood’s advanced digital technology converts analog waveforms into digital data in real-time, enabling such digital processing as IF filtering, slope tune, auto notch and AGC. The TS-2000(X) transceiver works as the Master, sending data to the Slave transceiver. 1 Switch ON the Transfer function of each transceiver. On the TS-2000(X), access Menu No. 52 and select ON. For the compatible transceiver, refer to the instruction manual that came with the transceiver.
What are the Kenwood TS 2000 features and functions?There is a wide range of features and functions that are built into the Kenwood TS 2000 radios. These functions are designed to give the user full control over his or her transmission and reception needs for staying connected. Some of the features and functions you will find include the following:
- RIT/XIT - This function provides the ability to transmit over one frequency while giving you the opportunity to receive a transmission over another.
- Backlit Front Panel - The backlighting built into the front panel provides illumination for easier viewing in all types of lighting. You can make adjustments to the lighting as needed and ensure that you receive easy read-outs for the frequencies that the transceiver is tuned into.
- High Stability TCXO - The TCXO feature ensures that you receive clear frequency stability for all of the transmissions and reception you experience. The professional-grade stability works with the main band in SSB, CW, FSK, and AM modes.
- Built-In Autotuner - The built-in autotuner gives you the opportunity to fine tune any channel you wish to stream through the receiver.
- Keypad Entry - The keypad that is designed into the TS 2000 deck gives you the power to perform manual entry when needed.
There are several points that you should consider when purchasing the low-priced TS 2000 radio manufactured by Kenwood. These factors include the following:
- Condition - The TS 2000 radio is a discontinued item. You will find a wide range of products in varying conditions offered on eBay. This gives you the ability to select between products that are ready to use or models intended for parts and repair needs you may experience with current equipment you are already using.
- Purpose - Having a clear understanding of the purpose you have for the radio ensures that you will be making a wise investment when purchasing this product.
- Cost - With so many different options offered on eBay, you are able to compare the cost with the condition of each product you are researching. This allows you to get the value that you can feel confident about.
- #05.09.20153.8 Mb5User Manual 2.pdf
Size:Download
Black box version: TheTS-B2000 can be used exclusively for computer control or in a vehicle with a remote head*.
*Optional RC-2000 mobile controller
* With optional UT-20 1200MHzall-mode unit
Satellite communications: Main-band circuits are used for satellite mode, which thus benefits fromIF-DSP.
Striking design: With its large amber LCD and backlit keys, the distinctive front panel of theTS-2000/2000X improves operating ease.
Kenwood Skycommand System II Plus:Built-in Transporter function means the TS-2000/2000X/ B2000 can be operated remotely with one handheld transceiver.
High frequency stability:Built-in TCXO offers professional performance — ±0.5ppm* (-10~+50°C).
Digital signal processing:IF-DSP (main band) combines with AF-DSP (sub band) to provide precision filtering and interference reduction.
Other features include a mobile controller and radio control software (both options),built-in auto antenna tuner, DX cluster tune, and an antenna terminal dedicated to HFlow-band reception.
in a Streamlined Package
Kenwood’s new all-mode multibander breaks new ground in more ways than one.
This TS-B2000 black box version offers the same functionality and performance as the
the desk with your personal computer.
Sleek front panel with power
switch and mic/headphone terminals
OptionalRC-2000 mobile controller available for mobile use
Easy Mode
HF/50/144/440/1200*MHz
A marvel of electronic engineering: Kenwood’s stylish new all-mode multibander is packed withtop-end features yet compact enough
to use at home, in your car, or on a DX’pedition. With its 3D front panel, featuring backlit keys and large amber display, its appear-
ance is as distinctive as its performance.
HF/50/144/440/1200*MHz HF/50/144/440/1200MHz
Kenwood’s new TS-2000/2000X/B2000 all-mode multibander may be compact, but it’s equipped with all the features you would expect to find in atop-of-the-line rig.
IF Digital Signal Processing
The TS-2000/2000X/B2000 is serious about digital signal processing. Kenwood’s advanced digital technology converts analog waveforms into digital data inreal-time, enabling such digital processing as IF filtering, slope tune, auto notch and AGC.IF-stage DSP onmain-band transmit and receive — including V/UHF bands — allows the greatest range of control and unprecedented performance.
DSP Detection
AF filter)
Digital Filtering
There is absolutely no need to purchase optional filters: digital IF filters are available for each mode (FM: digital AF filter), offering performance superior to anything possible with analog circuitry. When operating in SSB/FM/AM modes, this digital filtering enables both highand low-cut frequency variance. Employing slope tune, you can thus cut out
slope | slope |
tune | tune |
Interfering | Desired |
signal (SSB) | signal |
(SSB) | |
Interfering | |
signal | |
(CW) | |
SSB slope tune |
noise with minimal effect | SHIFT | |||||
on sound quality. In AM | ||||||
Desired | ||||||
signal | ||||||
mode, the | (CW) | |||||
quency can reduce inter- | Interfering | |||||
ference by controlling the | signal | |||||
(SSB) | ||||||
IF pass bandwidth -- | ||||||
useful for receiving short- | ||||||
wave broadcasts. In CW | ||||||
mode, the WIDTH func- | ||||||
WIDTH | ||||||
tion is supplemented by | ||||||
Desired | ||||||
center frequency shift, | ||||||
signal | ||||||
allowing adjacent signal | (CW) | |||||
interference to be tuned | Interfering | Interfering | ||||
out. The WIDTH function | signal | signal | ||||
(SSB) | ||||||
(CW) | ||||||
also provides noise | ||||||
reduction capabilities in | ||||||
FSK with 4 steps avail- |
able: 250, 500, 1000 and 1500Hz. And thanks to AF-stage DSP, independent control ofhigh-cut andlow-cut frequencies (12 steps each) provides slope tune capability in FM as well.
IF Auto Notch
Since it is working with a
digital signal, IF Auto | DSP notch filter | ||
Beat | |||
Notch (main band, SSB | |||
mode) can provide | Conventional | ||
extremely sharp filtering | Target | notch filter slope | |
of carrier frequencies | signal | ||
from broadcast and con- |
tinuous beat sources. The interfering beat is removed far more accurately than in conventional analog systems, and Auto Notch will even track changes in the beat signal (tracking speed can be varied in 5 steps).
IF AGC
The digital AGC circuit (main band only) delivers very fast release characteristics, surpassing even the best analog designs. You can select a custom release time (20 steps) for
HF Band
50MHz Band | 440MHz Band |
144MHz Band | 1200MHz Band |
AF Digital Signal Processing
DSP is also executed at the AF stage, offering Beat Cancel and CW Auto Tune functions. It also enables you to achieve remarkable noise reduction and apply custom enhancements to your transmitted voice.
Beat Cancel
Automatic Beat Cancel, avail- | Canceled | |||
able for the main band (SSB | Beat | Beat | Beat | |
and AM modes), immediately | ||||
eliminates multiple beats | ||||
interfering with a desired signal. | ||||
It works well in combination | ||||
Target signal | ||||
with IF | ||||
Manual Beat Cancel | Frequency [Hz] |
A new Manual Beat Cancel function, which operates as a manual AF notch, can be used in all modes — though it is particularly effective in CW.
CW Auto Tune
0 | 300 | 400 | 500 | ||
0.0 |
10.0
[dB] | 20.0 |
30.0 | |
Attenuation | |
40.0 |
50.0
60.0
You no longer have to adjust | 70.0 |
80.0 | |
the VFO while operating on | |
CW — CW Auto Tune does it | |
for you automatically by adjusting | |
the VFO to your preset pitch at the | |
touch of a |
Noise Reduction
There are 2 types of noise reduction: LEM (NR1) and SPAC (NR2). LEM (Line Enhancer Method) — available for all modes on the main band and FM/AM on the sub band — automatically forms a filter shape around the target signal for a custom, dynamic noise reduction capability. The degree of enhancement can also be set manually for mainband use. The SPAC (Speech
Processing/Auto Correlation) | Line Enhancer Method | ||||
Formed filter | |||||
function utilizes a special sta- | |||||
Noise | Noise | ||||
tistical/correlation algorithm | |||||
to pull out weak signals that | Signal | ||||
are buried deep in noise. | |||||
Although available for all | SPAC Method | ||||
modes on the main band, it’s | Extract signal | ||||
from the noise | |||||
especially useful for tough CW | |||||
Noise | Noise | ||||
conditions. The correlation | |||||
time setting can be adjusted | |||||
in 10 steps between 2ms and | |||||
20ms. | Signal |
TX Audio Shaping
You have 3 ways to tailor audio quality with DSP: the TX/RX equalizer (SSB/FM/AM), TX filter bandwidth (SSB/AM), and speech processor (SSB/FM/AM). The TX/RX equalizer offers 4 frequency response settings on SSB, FM and AM: high boost for improved clarity, formant pass to
sounds, bass boost for stronger mode for an ‘analog’ sound. On
can choose between 6 TX filter according to your microphone and
. The speech processor works bands (SSB, FM and AM) for high
and minimal distortion.
Expanded Power and Performance
DX Cluster (Packet Cluster) Tune
DX cluster information received on the sub band is not just displayed on the LCD: it can also be used for instantly setting up the main band frequency to
cluster information. Up to 10 items can be stored in memory.
The simple 2-chip TNC is compliant with the AX.25 protocol for Sky Command and DX cluster tune.
Provision of main and sub bands enables dual-channel watch. Thisall-mode multibander can simultaneously receive two frequencies, even on the same band, allowing such combinations as HF+V/UHF, VHF+VHF, UHF+UHF and VHF+UHF (the sub band is used exclusively for 144/440MHz reception on FM/AM). This
means, for instance, that you can pick up local information on V/UHF while operating HF on the main band.
Satellite Communications
Kenwood Ts-2000 User Manual
This transceiver is the perfect | 1.00 | |
choice for contesting, mobiling | 0.80 | |
and FSK applications, deliver- | 0.60 | |
[PPM] | 0.40 | |
ing up to 100 (AM: 25) watts | 0.20 | |
0.00 | ||
on HF/50/144MHz bands. | Drift | |
Output is 50 (AM: 12.5) watts | Rating condition | |
Reception setting: | ||
on the 440MHz band, and 10 | ||
14.200MHz | ||
(AM: 2.5) watts on 1200MHz*. | ||
0 | 20 40 60 80 100 120 140 160 180 |
But there’s more than just | Elapsed time [min] |
power: the built-in TCXO ensures excellent frequency stability — ±0.5ppm (except in FM mode).
*Minimum output is 5 watts for HF/50/144/440MHz bands, 1 watt for 1200MHz.
CW Features
In addition to the new Auto Tune function, there is a full range of CW features. The full/semi break-in switching and delay time settings are fully adjustable. In semibreak-in the delay time between key release and active receive mode can be set for between 50ms and 1000ms. When using VOX operation the delay time can be set for between 150ms and 3000ms. Other CW features include pitch control(400-1000Hz), side tone monitor with10-step volume setting,DSP-based rise time adjustment, and CW reverse mode.
FSK Features
When operating in FSK mode, you can select shift frequencies (170, 200, 425 and 850Hz) and switch both KEY polarity and Hi/Low tones to suit your RTTY device. Additionally, the FSK reverse function lets you match transmission methods to the other party if necessary, for example changing the BFO frequency from LSB (normal) to USB (reverse).
FM Features
Satellite operations are enhanced with the IF-DSP, 10 dedicated memory channels, Doppler effect frequency adjustment (manual) and the ability to choose either normal or reverse shift for the trace.
Down link | ||
440MHz | 1200MHz | |
Up | HF/50MHz | |
144MHz | ||
link | ||
440MHz | ||
1200MHz |
As well as switchable Narrow/Wide deviation modes, the TS-2000/2000X/B2000 hasbuilt-in CTCSS functionality with 38EIA-standard sub-tones settings plus 1750Hz tone burst. Other features include DCS (104 codes), both crossband andfixed-band repeater operation, and 1200MHz ALT.
Data Communication Features
Packet filter bandwidth is fully selectable to match packet speed, and you can also switch ACC2 (PKD) input/output levels. For PSK31 mode, the menu offers a 100Hz bandwidth IF-DSP filter.
Ground Ext. key terminal Paddle terminal | Ext. AT terminal |
Kenwood Ts-2000 Instruction Manual
ANT terminals (144MHz, 440MHz)
ANT terminals(HF, 50MHz)
PANEL terminal for | DC 13.8V | ||||||||||||||||||||||||||||
mobile controller | ANT terminal | ||||||||||||||||||||||||||||
COM | |||||||||||||||||||||||||||||
terminal | (HF RX) | ||||||||||||||||||||||||||||
ANT terminal | |||||||||||||||||||||||||||||
(1200MHz) Epson 2580 scanner driver download. | |||||||||||||||||||||||||||||
Ext. speaker | Ext. control | ACC2 | REMOTE | ||||||||||||||||||||||||||
terminals | terminal | terminal | terminal |
Enhanced Operating Ease
Automatic Antenna Tuner
The built-in antenna tuner — which also operates when the radio is in receive mode — covers amateur bands from 1.9 to 50MHz, with
rapid tuning lock when using presets.
300 Memory Channels
This transceiver provides a bank of 300 memories (plus 1 call channel for each band), with 290 assignable by name and 10 available for programmable scan. The scroll function lets you browse memory contents, memory channel copy sends the contents of one channel to another, lock-out memory changes the scan map to exclude certain channels, and memory shift alters the frequency stored in a channel. In addition, there are 10 ‘quick’ memories to capture a current operationon-the-fly — ideal for contest operation.
Multiple Scan Functions
A full range of scan functions is provided, including MHz scan, memory scan, and call scan. Group scan mode covers all 300 memory channels in groups of 10, and programmable band scan will search a frequency spread between two VFO settings (the scan-hold function stops the scanning for 5 seconds). A new feature is programmable slow scan, which will automatically slow down to check a frequency range you’re interested in. As well as varying scan speed, you can choose eithertime-operated (TO) orcarrier-operat- ed (CO)busy-stop-resume.
Menu System
All of the power and functions of the TS-2000/2000X/ B2000 can be accessed through themenu-driven display interface on the front panel. You may also activate the Quick Menu feature to access only your mostcommonly-used functions.
Other Features
Large,amber-colored backlit LCDBacklit front keys
Compatible with optionalDRU-3A digital recording unit
Key operation announcement with optionalVS-3 voice synthesizer (option)
Programmable function keys
Transverter (displays up to 19.99999GHz)
RF gain controlAll-mode squelchSimple visual scan
Auto simplex checkerAuto repeater offset (144/1200MHz)
DTMF remote controlBuilt-in keyer
Noise blankerAutopower-off
The TS-2000/2000X/B2000 is fully equipped for Kenwood’s Skycommand System II Plus. With just a handheld transceiver you can relax in your garden while DX’ing from your shack. Alternatively, you could enjoy HF access via the multibander in your parked car while taking in a baseball game.
Conventionally two extra transceivers are required for KSS operation — a Commander and a Transporter — but the TS-2000/2000X/B2000 has Transporter functions built in. This means you can operate it remotely with a single mobile or handheld unit, such as theTH-D7A or
Kenwood Skycommand System II Plus is | compatible with the AX.25 protocol. In | |||||||||||||||||
the most sophisticated version yet devel- | addition, if a second | |||||||||||||||||
oped, enabling | B2000 unit is used as the Commander, | |||||||||||||||||
access to such HF functions as RIT/XIT, | you have control over noise reduction, | |||||||||||||||||
mode switching (USB, FM, etc.), split- | noise blanker on/off and antenna | |||||||||||||||||
frequency operations on/off, and memory | switching among other functions. | |||||||||||||||||
shift. Control is effected via simple TNC, |
440MHz band | Voice signals |
Control signals |
Confirmation of | 440MHz band | HF Antenna | |
HF frequency | |||
Commander (CMD) | HF receive audio | 144MHz band | |
with | |||
440MHz/144MHz |
You control theTS-2000/2000X/B2000 from the portable Commander (CMD).
Voice is transmitted from the CMD unit on the 440MHz band.
Control signals are also sent from the CMD unit on the 440MHz band.
The HF signal received by theTS-2000/2000X/B2000 is relayed to the CMD unit on the 144MHz band.You can confirm the HF frequency on the LCD of the CMD.
Options
Mobile Controller | Radio Control | 1200MHz | Digital Recording | Voice Synthesizer | Deluxe | Small | Mobile Bracket | Hand Microphone |
Program | Unit | Unit | Headphones | Headphones | ||||
(Supplied with | (8Ω ) | (12.5Ω ) | ||||||
Hand Microphone | Hand Microphone | Deluxe Desktop | Desktop | DC Power | Mobile Speaker | |||
with DTMF | Microphone | Microphone | Desktop Microphone Cable | Supply | Speaker |
*The UT-20 can only be installed by a qualified technician; do not attempt to install it yourself.
**Do not install the MB-430 Mobile Bracket vertically as this would adversely affect transceiver operation and safety.
Not all accessories may be available, please contact dealers for details.
Specifications
GENERAL | ||||||||||||
Transmitter Frequency Range | Main: | 160, 80, 40, 30, 20, 17, 15, 12, 10, 6, 2 meter | ||||||||||
bands, 70, 23 | ||||||||||||
Sub: | 2 meter band, 70cm band | |||||||||||
Receiver Frequency Range | Main: | (0.03) 0.5 ~ 30 MHz, (30) 50 ~ 54 (60) MHz, | ||||||||||
(142) 144 ~ 148 (152) , (420) 430 ~ 450 MHz, | ||||||||||||
1240 ~ 1300 MHz | ||||||||||||
Sub: | (118) 144 ~ 148(174) MHz, | |||||||||||
(220) 438 ~ 450 (512) MHz | ||||||||||||
* Figures in parenthesis ( ) indicate VFO coverage range | ||||||||||||
Mode | A1A (CW), J3E (SSB), A3E (AM), F3E (FM), F1D (FSK), F2D | |||||||||||
Power Requirement | 13.8 V DC ±15% | |||||||||||
Current Drain ( Less t han ) | Transmit: | 20.5 A ( HF, 6m, 2m ), | ||||||||||
18 A ( 70cm), 9 A (23cm) | ||||||||||||
Standby: | 2.6 A | |||||||||||
Operating Temperature | 14°F ~ +122°F | |||||||||||
Frequency Stability | Main: | Other mode within ±0.5 x | ||||||||||
FM TX mode within ±0.5 x | ||||||||||||
Sub: | Within ±0.5 x 10 | |||||||||||
Antenna Impedance | 50Ω | |||||||||||
Microphone Impedance | 600 Ω | |||||||||||
Dimensions, projections not | ||||||||||||
included (W x H x D) | (270 x 96 x 317 mm) | |||||||||||
Microsoft gif animator free download full version. Easy GIF Animator Pro Crack are very full as well as but an easy tool for many customers, each for newbies in addition to for experts. Easy GIF Animator crack is the planets many popular cartoon GIF publishers as well as the best application for making cartoon photos, ads as well as switches.Due to the fact it is simple for newbies to make use of for relieve of utilizing, as well as for experts, in addition, it has key functions that issue to customers. | ||||||||||||
(270 x 96 x 317 mm) | ||||||||||||
Weight (approx.) | 17.19 lbs. ( 7.8 kg) | |||||||||||
TRANSMITTER | ||||||||||||
RF Output Power | SSB/CW/FM/FSK=100W, AM=25W (HF, 6m, 2m), | |||||||||||
SSB/CW/FM/FSK=50W, AM=12.5W (70cm) Reinstall windows xp home edition. | ||||||||||||
SSB/CW/FM/FSK=10W, AM=2.5W (23cm) | ||||||||||||
Modulation | ||||||||||||
SSB | Balanced modulation | |||||||||||
FM | Reactance modulation | |||||||||||
AM | ||||||||||||
Maximum Frequency Deviation | Less than ±5 kHz (wide) | |||||||||||
(FM) | Less than ±2.5 kHz (narrow) | |||||||||||
Spurious Radiation | 1.8 ~ 28MHz: | Less than | ||||||||||
50 ~ 430MHz : | Less than | |||||||||||
1200MHz: | Less than | |||||||||||
Carrier Suppression | More than 50 dB | |||||||||||
Unwanted Sideband Suppression | More than 50 dB | |||||||||||
Transmit Frequency Response (SSB) | 400 ~ 2600 Hz (within | |||||||||||
XIT Variable Range | ±20.00 kHz | |||||||||||
Antenna Tunable Range | 16.7Ω ~ 150Ω (160 ~ 6m Band) | |||||||||||
RECEIVER | ||||||||||||
Circuitry | ||||||||||||
Main: | SSB/CW/AM/FSK | Quadruple superheterodyne | ||||||||||
FM | Triple conversion superheterodyne | |||||||||||
Sub: | AM/FM | Double conversion superheterodyne | ||||||||||
Intermediate Frequency | ||||||||||||
Main: | 1 st | IF | 69.085 MHz or 75.925 MHz (HF ~ 50 MHz) | |||||||||
2 nd | 41.895 MHz (144/440MHz), 135.495 MHz (1200MHz) | |||||||||||
IF | 10.695 MHz | |||||||||||
3 rd | IF | 455 kHz | ||||||||||
4 th | IF | 12.0 kHz | ||||||||||
Sub: | 1 st | IF | 58.525 MHz | |||||||||
2 nd | IF | 455 kHz |
RECEIVER (Continued) | ||
Sensitivity | Less than 4 µV (500 kHz ~ 1.705 MHz), | |
Main: | SSB/CW/FSK | |
(S/N 10 dB) | Less than 0.2 µV (1.705 ~ 24.5 MHz), | |
Less than 0.13 µV (24.5 ~ 30 MHz), | ||
Less than 0.13 µV (50 ~ 54 MHz), | ||
Less than 0.16 µV (144 ~ 148 MHz), | ||
Less than 0.11 µV (430 ~ 450 MHz), | ||
Less than 0.11 µV (1240 ~ 1300MHz), | ||
AM (S/N 10 dB) | Less than 31.6 µV (500 kHz ~ 1.705 MHz), | |
Less than 2 µV (1.705 ~ 24.5 MHz), | ||
Less than 1.3 µV (24.5 ~ 30 MHz), | ||
Less than 1.3 µV (50 ~ 54 MHz), | ||
Less than 1.4 µV (144 ~ 148 MHz), | ||
Less than 1.0 µV (430 ~ 450 MHz), | ||
Less than 1.0 µV (1240 ~ 1300MHz) | ||
FM (12 dB SINAD) | Less than 0.22 µV (28 ~ 30 MHz), | |
Less than 0.22 µV (50 ~ 54 MHz), | ||
Less than 0.25 µV (144 ~ 148 MHz), | ||
Less than 0.18 µV ( 430 ~ 450 MHz), | ||
Less than 0.18 µV (1240 ~ 1300MHz) | ||
Sub: | AM (S/N 10 dB) | Less than 2. 25 µV (144 ~ 148 MHz), |
Less than 1. 55 µV (438 ~ 450 MHz) | ||
FM (12 dB SINAD) | Less than 0. 40 µV (144 ~ 148 MHz), | |
Less than 0. 28 µV (438 ~ 450 MHz) | ||
Squelch Sensitivity | Less than 18 µV (500 kHz ~ 1.705 MHz), | |
Main: | SSB/CW/AM/FSK | |
Less than 1. 8 µV (1. 8 ~ 28.7 MHz), | ||
Less than 1. 1 µV (50 ~ 54 MHz), | ||
Less than 1. 1 µV (144 ~ 148 MHz), | ||
Less than 1. 1 µV (44 0 ~ 450 MHz), | ||
Less than 1.1 µV (1240 ~ 1300MHz) | ||
FM | Less than 0.2 µV (28 ~ 30 MHz), | |
Less than 0.2 µV (50 ~ 54 MHz), | ||
Less than 0.16 µV (144 ~ 148 MHz), | ||
Less than 0.1 µV (430 ~ 450 MHz), | ||
Less than 0.1 µV ( 1240 ~ 1300MHz) | ||
Sub: | AM | Less than 1. 1 µV (144 ~ 148 MHz), |
Less than 1.1 µV (438 ~ 450 MHz) | ||
FM | Less than 0.23 µV ( 144 ~ 148 MHz), | |
Less than 0.18 µV (438 ~ 450 MHz) | ||
Image Rejection Ratio | ||
Main / Sub | More than 70 dB / More than 60 dB | |
IF Rejection Ratio | ||
Main / Sub | More than 70 dB / More than 60 dB | |
Selectivity | ||
Main: | SSB (Low: 300MHz, | More than 2.2 kHz |
Hi: 2600MHz) | Less than 4.4 kHz | |
AM (Low:100MHz, | More than 6.0 kHz | |
Hi:3000MHz) | Less than 12.0 kHz | |
FM | More than 12.0 kHz | |
Less than 25.0 kHz | ||
FM (Narrow) | More than 8 .0 kHz | |
Less than 20 .0 kHz | ||
Sub: | AM | More than 12.0 kHz |
Less than 25.0 kHz | ||
FM | More than 12.0 kHz | |
Less than 25.0 kHz | ||
RIT Variable Range | ±20.00 kHz | |
Notch Filter Reduction | More than 30 dB (1 kHz) | |
Beat Elimination | More than 40 dB (1 kHz) | |
Low Frequency Output | More than 1.5 W 8 Ω at 10% distortion |
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
These specifications are guaranteed for Amateur Bands only.